-40%

Crosby 5/8" Screw Pin Anchor Shackle 3.25T G-209 - Galvanized

$ 12.98

Availability: 100 in stock

Description

• Nominal Size 5/8in, Capacity: 3.25T, Grade 6.
• Forged - Quenched and Tempered, with alloy pins.
• Working Load Limit and grade "6" permanently shown on every shackle.
• Hot Dip galvanized.
• Fatigue rated.
• Shackles 25t and larger are RFID EQUIPPED.
• Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Proof testing and certification available when requested at the time of order, charges will apply.
• Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F).
•3.25t through 25t G209 anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These shackles are statistical proof and impact tested to 42 joules (31 ft-lbs.) min. avg. at -20 degrees C (-4 degrees F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
• All other 209 and all 210 shackles can meet charpy requirements of 42 joules(31 ft-lbs) avg. at -20 degrees C (-4 degrees F) upon special request. • Meets or exceeds all requirements of ASME B30.26.
• Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.
• Crosby 3.25t through 25t G209 anchor shackles are type approved to DNV Certification Notes 2.7-1 - Offshore Containers. These Crosby shackles are statistical proof and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request.
• Look for the Red Pin®. . . the mark of genuine Crosby quality